TNC 320

    Specifications

    Specifications

    Components

    • Main computer with TNC keyboard and integrated 15.1-inch TFT color flat-panel display with soft keys

    Operating system

    • HEROS 5 real-time operating system for machine control

    Memory

    • 1.8 GB (on compact flash memory card CFR)

    Input resolution and display step

    • Linear axes: up to 0.1 µm
    • Angular axes: to 0.0001°

    Input range

    • Maximum 99 999.999 mm or 99 999.999°

    Interpolation

    • Linear in 4 axes
    • Circular in 2 axes
    • Circular in 3 axes with tilted working plane
    • Helical: superimposition of circular and straight paths

    Block processing time

    • 3 ms (3-D straight line without radius compensation)

    Axis feedback control

    • Position resolution: Signal period of the position encoder/1024
    • Cycle time of position controller: 3 ms

    Range of traverse

    • Maximum 100 m

    Spindle speed

    • Maximum 100 000 rpm (analog speed command signal)

    Error compensation

    • Linear and nonlinear axis error, backlash, reversal spikes during circular movements, thermal expansion
    • Static friction, reversal error, sliding friction

    Data interfaces

    • RS-232-C/V.24 max. 115 Kbps
    • Extended data interface with LSV2 protocol for remote operation of the TNC 320 over the data interface with the HEIDENHAIN software TNCremo or TNCremoPlus
    • Gigabit Ethernet interface 1000BASE-T
    • 3 x USB (1 x front USB 2.0; 2 x rear USB 3.0)

    Diagnostics

    • Fast and simple troubleshooting through integrated diagnostic aids

    Ambient temperature

    • Operation: 0 °C to +45 °C
    • Storage: –20 °C to +60 °C